Минеральная Фактурная Декоративная Штукатурка Раствор

  • Минеральная Фактурная Декоративная Штукатурка Раствор

Пожалуйста, заполните форму для выбора Продукты EPS в соответствии с потребностями вашего проекта.

Product Specifications

Teknosistem Mineral Textured Decorative Plaster is a white cement-based, one-component and 2 mm mineral particle-textured decorative wall coating material with polymer addition, applied on top layer with a trowel.

Areas of Application

It is applied on interior and exterior wall plasters as the decorative topcoat material in exterior thermal insulation systems.

Preparation of Surfaces

  • The application surface and thermal insulation boards should be durable and cleaned of dust, grease, tar, bitumen, paint, silicone, curing material, detergent and moulding oils that prevent adhesion.
  • Before application, decorative plaster lining is applied on the surface with brush or roller.

Preparation

  • 5 kg Teknosistem Mineral Textured Decorative Plaster (White-Coarse) is added in the quantity of fresh water stated in the technical specifications table, and mi􏰂ed with a preferably low-speed mixer until there is no lump left.
  • The prepared mortar is dried and matured for 5-10 minutes, and remi􏰂ed 1-2 minutes before starting application.
  • The prepared mortar should be consumed within 3 hours. Mortar should not be used after expiry of usage period.

Application Information

  • The material should be applied on the surface with a steel trowel, and spread on the whole surface in equal thickness.
  • Application thickness should be adjusted to the coarsest aggregate.
  • Patterns should be formed on the plaster with circular movements using a plastic trowel within 10 minutes at the latest while the material is still wet.
  • If the air temperature is high after completion of the application, the surface should be humidified until the cement is stiffened.

Warnings

  • Application should be avoided at temperatures below +5°C and above +35°C.
  • The application should be performed ceaselessly ifpossible, or conducted separately by dividing thesurface into areas of approximately 20 m2 if it isnecessary to have a break.
  • Application with a plastic trowel should be startedwithin approximately 10 minutes at the latest, withoutallowing formation of a film layer on the plaster.
  • Application should be avoided in areas that arefrozen, have the risk of freezing within 24 hours, orare directly exposed to sun and wind.
  • Application should not be performed and protectivemeasures should be taken if snow or severe cold isexpected within one week until the cement isstiffened after the application.
  • No powder and water should be added to mortarafter expiry of usage period.
  • The product should not be applied on horizontalsurfaces that get wet in the rain.
  • The values above are valid for a temperature of+23°C and relative humidity of 50%.

Package

25 kg kraft bag

Storage


They can be stored for 12 months by being stacked maximum 10 layers of unopened packages on palette in dry environment.


Technical Specifications of Mineral Textured Decorative Plaster

Подпишитесь на рассылку новостей и Вы первыми получите информацию о нас.